CALL US : +34 (93) 783 30 36   

Technical Racing Products

Los especialistas del MiniZ del radiocontrol

Plasti Dip Spray Finishing Green Metalizer [075815112439]

Plasti Dip Spray Finishing Green MetalizerPlasti Dip Spray Finishing Green Metalizer

Plasti Dip Spray Finishing Green Metalizer [075815112439]

Ref: 11243-6

Quantity :

Forma de Pago aceptadas:
Tarjeta de Crédito VISA

Stock updated: 8 h. 47m.

In Stock
Entrega Inmediata

Politica de devoluciones
Politica de envios

Spray paint canister (400ml) by PLASTI DIP in color Green Metal Effect (USA format).

The Plasti Dip paint cans labeled "Effects", have the same composition and the same characteristics as the basic Plasti Dip colors, and are designed to achieve different shades when sprayed on the basic colors of Plasti Dip.

This paint is used to cover objects and protect them from inclement weather (water), UV rays, etc. Once dry it remains flexible and completely odorless.

It's waterproof.

PLASTI DIP paints, once dry, can be removed by pulling them, as if it were a thin adhesive film. We do not need to sand the piece or use any type of solvent for the unpainting.

The liquid rubber PLASTI DIP forms a protective layer, rubber, very useful for sealing, cushioning and framing. It is also used as an anti-slip product. Especially recommended for indoor and outdoor use as it withstands extreme temperatures, from -34ºC to 93ºC. It is also resistant to acids, alkalis, salts, oils, as well as to many chemical agents.

It does not contain silicone and once dry, it can be easily removed.

Especially adherent to metals, wood, plastics, glass, fabrics, wool, stone, glass or carbon fibers, etc. To increase its adhesion we can use the primer product specially designed for the liquid rubber Plasti Dip.
How to use:

The surface to be protected must be dry, clean, and free of substances that hinder its adhesion. Before opening the bottle and applying the product, shake gently and open. We must let it rest a few minutes to avoid air bubbles.

We can apply the PLASTI DIP paint using a brush or brush, we can also spray it, and we can also work by immersing it by dipping the piece inside the paint canister.

To spray it, we can use the Plasti Dip paint spray bottle, or the aliquid paint bottle using the PLASTI DIP solvent to dilute the paint.

To achieve a good finish when painting by spray, we have to paint based on giving thin layers (4 to 6 layers on average), leaving a minimum drying time between layers, about 6-10 minutes.

In this case of spraying, we recommend the use of electric guns (or also called turbine guns).

Technical information of the PLASTI DIP painting:

- Stable at temperatures between -34ºC and 93ºC.
- Optimum application temperature, around 20ºC.
- Minimum drying time on contact. 5 min approx.
- Complete drying time: 1 hour, depending on the thickness and number of layers applied.
- The manufacturer recommends layers of 0.2mm thickness, which will require 150gr of product per m2.


When will I recive my order?

Correos en Oficina: Si haces el pedido antes de las 12 del mediodia se expedira durante el mismo dia, por lo que estara disponible para recoger a los 2/3 dias de su expedición

Nacex: Si haces el pedido antes de las 18h el pedido se expedira durante el mismo dia y lo recibiras en 24h, a excepción de las poblaciones pequeñas donde Nacex se reserva el derecho de entregar el pedido en 48h

Fedex: Si haces el pedido antes de las 14h el pedido se expedira durante el mismo dia y lo recibiras en 48/72h dependiendo del destino internacional

How much will the shipment cost?

No podemos decirte con exactitud el precio del envio hasta que no sepamos el volumen, peso y destino de tu envio, asi pues la mejor manera de conocer el precio del envio es realizando los pasos de la compra hasta llegar al punto donde la página web cotiza el envio